Wireless Repeater

★ Please send your technical specification for an inquiry or a custom-design

1. Product Name:  Single Band Repeater/Band selective repeater

Product Range: S10 ~S20 10~20dB/ S23~S30 23~30dBm/ S33~S40 33~40dBm

1~3 sub bands in a system

Remote Control Software

Characteristics:

1. Industrial standard repeaters for cellular operators

2. Support 1 2 or 3 sub bands in one mobileband

3. ETSI & 3GPP 3GPP2 standards

4. Support any cellular devices (voice data video)

5. SOHO solution for small or medium areas

6. Alarm LED's for error detection

7. Manual gain control for UL and DL

8. Linked UL & DL Automatic gain control

9. Auto shut down if oscillation is detected

10. Universal power range of 90V~265V

11.Small size light weight low power consumption

12.Local and remote monitoring control system (Optional)

Specifications: 

Electrical specification				Uplink	Downlink
Frequency Range		CDMA800		824 ~ 849 MHz	869 ~ 894 MHz
		CDMA1900		1850 ~ 1910 MHz	1930 ~ 1990 MHz
		GSM850		824 ~ 849 MHz	869 ~ 894 MHz
		GSM900 & EGSM		880 ~ 915 MHz	925 ~ 960 MHz
		DCS		1710 ~ 1785 MHz	1805 ~ 1880 MHz
		PCS		1850 ~ 1910 MHz	1930 ~ 1990 MHz
		WCDMA		1920 ~ 1980 MHz	2110 ~ 2170 MHz
		AWS		1710 ~ 1755 MHz	2110 ~ 2155 MHz
Max .Gain		S10		≥ 60dB	≥ 65dB
		S15		≥ 65dB	≥ 65dB
		S20		≥ 65dB	≥ 70dB
Max .Output Power		S10		≥ 10dBm	≥ 10dBm
		S15		≥ 12dBm	≥ 15dBm
		S20­		≥ 15dBm	≥ 20dBm
Band width (-3dB)				available upon request
MGC ( Step Attenuation )				≥ 31dB / 1dB step
Automatic Level Control				≥ 15dB, auto shut off after 15dB
Gain Flatness	GSM & CDMA			≤ 3dB (p-p)
	WCDMA			≤ 2dB/ 3.84MHz
Noise Figure				≤ 6dB
VSWR				≤ 2.0
Group Delay				≤ 4.5μs
Frequency stability				≤ 0.01ppm
Out of Band Gain &   Spurious Emission &   Output inter-modulation				GSM Meet  ETSI TS   151 026 V 6.1.0
				WCDMA Meet 3GPP TS 25.143 ( V 6.2.0   )
				CDMA Meet  IS95   & CDMA2000
WCDMA System		Spurious Emission Mask		Meet 3GPP TS 25.143 ( V 6.2.0   )
		Modulation Accuracy		≤ 12.5%
		Peak Code Domain Error		≤ -35dB@Spreading Factor 256
		Input inter-modulation		WCDMA Meet 3GPP TS 25.143 ( V 6.2.0   )
		ACRR		≥ 30dBc/30KHz @ ±5MHz   ≥ 50dBc/30KHz @ ±10MHz
CDMA System		Rho		ρ > 0.980
		ACPR		Meet IS95 & CDMA2000
LED  Alarm				Standard
Power LED				Power Indicator
ALC LED				Orange @ ALC 1~5dB, Red   @ ALC 15dB~20dB, LED off after 5 seconds   red color
Software				Standard
Local Monitoring				PC via USB    Port
Remote Monitoring				Via SMS or GPRS Modem
Controlled Parameters				Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
Monitoring Parameters				Gain, Frequency, Repeater ON/OFF, Alarm Message.
Alarm Items				Repeater Failure, DC Failure, ALC Alarm, PLL Failure.
Mechanical  Specifications				Standard
I /O Port				N-Female
Impedance				50 ohm
Operating Temperature				-25ºC~+55ºC
Environment Conditions				IP40
Dimensions			1 sub band	250x155x53mm
			2 sub bands	250x200x53mm
			3 sub bands	250x250x53mm
Weight			1 sub band	≤ 2.5Kg
			2 sub bands	≤ 3Kg
			3 sub bands	≤ 3.5Kg
Power Supply				Input AC90~264V,output DC9V/ 3A(or 5A)

 

2.  Product Name:  Dual Band Repeater/Dual Band selective repeater

Product Range: S10~S20-DB 10~20dBm/ S23-DB S27-DB S30-DB 23dBm ~30dBm/ S33-DB S37-DB 33~37dBm

Supports Two Systems

Software Optional

Characteristics:

1.Industrial standard repeaters for cellular operators

2.ETSI & 3GPP 3GPP2 standards

3.Support any cellular devices (voice data video)

4.Dual band to amplify any two band

5.Medium power level for small or medium areas

6.Alarm LED's for error detection

7.Manual gain control for UL and DL

8.Linked UL & DL Automatic gain control

9.Auto shut down if oscillation is detected

10.OMT and OMC are available

11.Universal power range of 90V~265V

12.Small size light weight low power consumption

Specifications:

Electrical   specification			Uplink	Downlink
Frequency Range		CDMA800	824 ~ 849 MHz	869 ~ 894 MHz
		CDMA1900	1850 ~ 1910 MHz	1930 ~ 1990 MHz
		GSM850	824 ~ 849 MHz	869 ~ 894 MHz
		GSM900 & EGSM	880 ~ 915 MHz	925 ~ 960 MHz
		DCS	1710 ~ 1785 MHz	1805 ~ 1880 MHz
		PCS	1850 ~ 1910 MHz	1930 ~ 1990 MHz
		WCDMA	1920 ~ 1980 MHz	2110 ~ 2170 MHz
		AWS	1710 ~ 1755 MHz	2110 ~ 2155 MHz
Max .Gain		S10-DB	≥ 60dB	≥ 65dB
		S15-DB	≥ 65dB	≥ 65dB
		S20-DB	≥ 65dB	≥ 70dB
Max .Output Power		S10-DB	≥ 10dBm	≥ 10dBm
		S15-DB	≥ 12dBm	≥ 15dBm
		S20-DB	≥ 15dBm	≥ 20dBm
Band width (-3dB)			available upon request
MGC ( Step Attenuation )			≥ 31dB / 1dB step
Automatic Level Control			≥ 15dB, auto shut off after 15dB
Gain Flatness	GSM & CDMA		≤ 3dB (p-p)
	WCDMA		≤ 2dB/ 3.84MHz
Noise Figure			≤ 6dB
V.S.W.R			≤ 2.0
Group Delay			≤ 4.5μs
Frequency stability			≤ 0.01ppm
Out of Band Gain &   Spurious Emission &   Output inter-modulation			GSM Meet ETSI TS 151 026 V 6.1.0
			WCDMA Meet 3GPP TS 25.143 ( V 6.2.0   )
			CDMA Meet IS95 & CDMA2000
WCDMA System		Spurious Emission Mask	Meet 3GPP TS 25.143 ( V 6.2.0   )
		Modulation Accuracy	≤ 12.5%
		Peak Code Domain Error	≤ -35dB@Spreading Factor 256
		Input inter-modulation	WCDMA Meet 3GPP TS 25.143 ( V 6.2.0   )
		ACRR	≥ 30dBc/30KHz @ ± 5MHz   ≥ 50dBc/30KHz @ ± 10MHz
CDMA System		Rho	ρ > 0.980
		ACPR	Meet IS95 & CDMA2000
LED  Alarm			Standard
Power LED			Power Indicator
ALC LED 1 --Low   frequency Band			Orange @ ALC 1~5dB, Red   @ ALC 15dB~20dB, LED off after 5 seconds   red color
ALC LED 2 --High   frequency Band			Orange @ ALC 1~5dB, Red   @ ALC 15dB~20dB, LED off after 5 seconds   red color
Software			Standard
Local Monitoring			PC via USB    Port
Remote Monitoring			Via SMS or GPRS Modem
Controlled Parameters			Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
Monitoring Parameters			Gain, Frequency, Repeater ON/OFF, Alarm Message.
Alarm Items			Repeater Failure, DC Failure, ALC Alarm, PLL Failure.
Mechanical  Specifications			Standard
I /O Port			N-Female
Impedance			50 ohm
Operating Temperature			-25ºC~+55ºC
Environment Conditions			IP40
Dimensions			250x155x106mm
Weight			≤ 4.5Kg
Power Supply			Input AC90~264V,output DC9V / 5A

 

3. Product Name:  Triple Band Repeater/Dual Band selective repeater

Product Range: S10-TB S15-TB S20-TB 10dBm ~ 20dBm/

Characteristics:

1.CE FCC certified

2.Industrial standard repeaters for cellular

operators

3.ETSI & 3GPP 3GPP2 standards

4.Support any cellular devices (voice data video)

5.Triple band to support three band

6.SOHO solution for small or medium areas

7.Alarm LED's for error detection

8.Manual gain control for UL and DL

9.Linked UL & DL Automatic gain control

10.Auto shut down if oscillation is detected

11.OMT and OMC are available

12.Universal power range of 90V~265V

13.Small size light weight low power consumption

Specifications:

Electrical specification				Uplink	Downlink
Frequency Range			CDMA800	824 ~ 849 MHz	869 ~ 894 MHz
			CDMA1900	1850 ~ 1910 MHz	1930 ~ 1990 MHz
			GSM850	824 ~ 849 MHz	869 ~ 894 MHz
			GSM900 & EGSM	880 ~ 915 MHz	925 ~ 960 MHz
			DCS	1710 ~ 1785 MHz	1805 ~ 1880 MHz
			PCS	1850 ~ 1910 MHz	1930 ~ 1990 MHz
			WCDMA	1920 ~ 1980 MHz	2110 ~ 2170 MHz
			AWS	1710 ~ 1755 MHz	2110 ~ 2155 MHz
Max .Gain			S10-TB	≥ 60dB	≥ 65dB
			S15-TB	≥ 65dB	≥ 65dB
			S20-TB	≥ 65dB	≥ 70dB
Max .Output Power			S10-TB	≥ 10dBm	≥ 10dBm
			S15-TB	≥ 12dBm	≥ 15dBm
			S20-TB	≥ 15dBm	≥ 20dBm
Band width (-3dB)				available upon request
MGC ( Step Attenuation )				≥ 31dB / 1dB step
Automatic Level Control				≥ 15dB, auto shut off after 15dB
Gain Flatness	GSM & CDMA			≤ 3dB (p-p)
	WCDMA			≤ dB/ 3.84MHz
Noise Figure				≤ 8dB
VSWR				≤ 2.0
Group Delay				≤ 4.5μs
Frequency stability				≤ 0.01ppm
Out of Band Gain &   Spurious Emission &   Output inter-modulation				GSM Meet ETSI TS 151 026 V 6.1.0
				WCDMA Meet 3GPP TS 25.143 ( V 6.2.0   )
				CDMA Meet IS95 & CDMA2000
WCDMA System		Spurious Emission Mask		Meet 3GPP TS 25.143 ( V 6.2.0   )
		Modulation Accuracy		≤ 12.5%
		Peak Code Domain Error		≤ -35dB@Spreading Factor 256
		Input inter-modulation		WCDMA Meet 3GPP TS 25.143 ( V 6.2.0   )
		ACRR		≥ 30dBc/30KHz @ ±5MHz   ≥ 50dBc/30KHz @ ±10MHz
CDMA System		Rho		ρ > 0.980
		ACPR		Meet IS95 & CDMA2000
LED  Alarm				Standard
Power LED				Power Indicator
ALC LED				Orange @ ALC 1~5dB, Red   @ ALC 15dB~20dB, LED off after 5 seconds   red color
Software				Standard
Local Monitoring				PC via USB    Port
Remote Monitoring				Via SMS or GPRS Modem
Controlled Parameters				Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
Monitoring Parameters				Gain, Frequency, Repeater ON/OFF, Alarm Message.
Alarm Items				Repeater Failure, DC Failure, ALC Alarm, PLL Failure.
Mechanical  Specifications				Standard
I /O Port				N-Female
Impedance				50 ohm
Operating Temperature				-25 ºC ~+55 ºC
Environment Conditions				IP40
Dimensions				250x330x106mm
Weight				≤ 9Kg
Power Supply				Input AC90~264V,output DC9V / 10A

 

4. Repeater Softwares

 

4A. Name: OMT Software System

1. OMT software for local and remote monitoring control

2. Installation free version

3. Terminal software to control around 100 repeaters

4. Support SMS and GPRS communication

 

4B. Name: Repeater OMC

1. Monitor and control over 3000sets of different

types of repeaters

2. Based on SQL2000 server

3. Web interface

4. Support SMS GPRS TCP/IP GSM data

5. Support polling system